Problem summary
Water leaking from a Kenwood freestanding dishwasher—particularly from the right-hand side—is a common fault. The leak may be slow and steady or more pronounced, depending on where water is escaping.
Likely causes
Based on 41 similar repairs, the most common causes are:
Motor fault (22.5% of cases) — The circulation motor can develop internal leaks or seal failures that allow water to escape into the base of the appliance.
Hose damage (12.5% of cases) — Supply or drain hoses may crack, split, or become loose at their connections, especially if the appliance has been in use for several years or has moved.
Pump failure (10% of cases) — The drain or circulation pump can wear out or develop cracks, causing water to seep during the cycle.
Other possibilities include a faulty float switch or control board triggering incorrect water management, though these account for fewer reports.
Why this needs an engineer
All three top causes involve electrical components, mechanical seals, or sealed systems that require specialist knowledge and tools to diagnose and repair safely. Attempting to disassemble the appliance or replace these parts without proper training risks electric shock, water damage to electrics, or incomplete repairs that lead to further breakdown.
Even visual inspection of internal hoses requires partial dismantling. Our engineers use pressure testing and fault code reading to pinpoint the exact source of the leak.
When to call SMC Services
Contact us as soon as you notice water pooling under or around your dishwasher. Do not continue to run the appliance, as water can damage the motor, electrics, or flooring. The sooner we inspect it, the less likely secondary damage will occur.
If you're in Northern Ireland, SMC Services can usually book a repair within 2-3 working days.