Problem summary
Your LOGIK washing machine completes the wash cycle but fails to spin. The drum remains stationary, leaving wet clothes inside. This is a common fault pattern affecting models across the LOGIK range.
Likely causes
Based on 88 repair records for this exact fault, we've identified three main causes:
Motor failure accounts for about 35% of cases. The motor may have burned out, lost electrical continuity, or developed a mechanical fault that prevents it from turning the drum.
Drum bearing or drum failure occurs in roughly 31% of cases. The drum bearings may have worn out or seized, stopping rotation even if power reaches the motor.
Door seal and interlock faults cause about 25% of cases. A damaged or dislodged door seal, or a faulty door interlock switch, can prevent the spin cycle from starting as a safety measure.
Less commonly, a blockage in the waste pipe or filter can restrict water drainage, triggering the machine to skip the spin phase.
Why this needs an engineer
All three main causes involve sealed systems, electrical components or mechanical parts that require specialist tools and knowledge to diagnose and replace safely:
- Motor repair or replacement requires electrical safety testing and careful reassembly.
- Drum or bearing work involves opening the machine's sealed structure and precise realignment.
- Door seal or interlock replacement must be done to maintain water-tightness and electrical safety.
Attempting to disassemble the machine yourself risks water damage, electrical hazard or creating a safety issue with the door lock.
When to call SMC Services
Contact us if your LOGIK washing machine won't spin, particularly if:
- The drum is completely stationary when spin should start.
- The machine hums or makes clicking sounds but doesn't rotate.
- Water drains but the spin cycle doesn't engage.
- You've noticed water pooling or a damp smell around the door area.
If you're in Northern Ireland, SMC Services can usually book a repair within 2–3 working days.