SMC Services Book a repair

Nordmende Integrated Dishwasher Leaking: Diagnosis & Repair

NORDMENDE · integrated dishwasher · based on 201 similar repairs

Diagnosed by Sean McCauley · SMC Services · Last verified 10 May 2026

Need this fixed? Get the part — £2.53 →

5 parts matched to this fault · UK-wide delivery · prices include VAT

Likely causes (Nordmende integrated dishwasher):

Problem summary

A Nordmende integrated dishwasher leaking water indicates a fault in the door seal, internal plumbing, drainage system, or control electronics. Water can escape during the wash cycle or while the machine is stationary, and the leak may be visible under the unit, around the door frame, or inside the cabinet.

Likely causes

Based on 206 repair records for this fault pattern, the most common causes are:

Door seal (54% of cases) – The rubber gasket around the door degrades over time, cracks, or becomes misaligned. Water then leaks out during the wash cycle.

PCB (printed circuit board) faults (29% of cases) – A faulty control board can cause the water inlet or drain valve to malfunction, leading to overfilling or improper drainage.

Pump failure (15% of cases) – The drain pump may fail to pump water out, causing water to back up and leak through seals or joints.

Hose or connection leaks – Air pipes or internal water hoses may crack or become loose at their connections, though these are less common in integrated models.

Why this needs an engineer

All the likely causes involve sealed systems, electrical components, or mechanical parts that require specialist tools and knowledge to diagnose and repair safely. The door seal may look simple to replace, but improper fitting can lead to continued leaks. PCB faults require electrical testing to isolate the fault safely. Pump and hose work involves potential exposure to mains voltage and water ingress into electrical components.

Attempting DIY repairs risks:

When to call SMC Services

Contact us if you notice:

Our engineers carry common replacement parts and can usually complete the repair in one visit. If you're in Northern Ireland, SMC Services can usually book a repair within 2-3 working days.

Step by step

  1. Stop using the machine. Turn off the dishwasher at the wall socket and do not run any further cycles until a qualified engineer has checked it.
  2. Check for visible water pooling. Look under the unit, inside the kitchen cabinet, and around the door frame to note where water is coming from. Take a photograph if possible.
  3. Inspect hoses if safely accessible. If you can see any hoses without removing panels, look for visible cracks or loose connections. Do not attempt to tighten or remove any parts.
  4. Note when the leak occurs. Tell the engineer whether water leaks during the wash cycle, during drainage, or when the machine is idle. This helps narrow down the cause.
  5. Contact SMC Services. Provide the appliance model, fault details, and your location. An engineer will arrange a visit to diagnose and repair the leak safely.

Frequently asked questions

Is a leaking dishwasher safe to use?
No. Continued use risks water damage to your kitchen and flooring, and electrical hazards if water reaches the control board or mains connections. Stop using it and contact an engineer.
Will the door seal just need tightening?
Possibly not. While a misaligned door can sometimes be adjusted, a degraded seal usually requires replacement. An engineer can assess whether adjustment is sufficient.
What if water is leaking from underneath?
This often points to a pump failure or internal hose crack. These require the machine to be partly dismantled to diagnose and repair safely, which is engineer work.
Could a leaking dishwasher be under warranty?
That depends on your purchase date and warranty terms. Our engineers can advise once we've identified the fault, but we cannot provide warranty decisions.
How long does a dishwasher repair usually take?
Most leaks are fixed in under an hour once the engineer diagnoses the cause and has the right part available. Complex faults may require a follow-up visit.

Get this fixed

The parts most often needed for this repair — order direct:

Commonly needed for Nordmende integrated dishwasher Midea Door Spring (672000100000) £2.53 SMC04849 Confirm your model number before ordering Check & buy → Commonly needed for Nordmende integrated dishwasher Midea Door Lock (674000301001) £4.70 SMC04969 Confirm your model number before ordering Check & buy → Commonly needed for Nordmende integrated dishwasher Vestel Door Lock (32009280) £14.18 SMC07177 Confirm your model number before ordering Check & buy → Commonly needed for Nordmende integrated dishwasher Midea Control Board Pcb (672050300123) £76.87 SMC04901 Confirm your model number before ordering Check & buy → Commonly needed for Nordmende integrated dishwasher Midea Control Pcb (17176000001140) £72.01 SMC05009 Confirm your model number before ordering Check & buy →
Browse all spares

Prefer a pro? A local appliance engineer can carry out this repair. SMC's own repair service covers Northern Ireland only. The parts above ship UK-wide.

Related diagnoses

Nordmende DF63 dishwasher leaking from front – diagnosis and fixes Nordmende integrated dishwasher won't drain: diagnosis and fix Nordmende Integrated Dishwasher Tripping Electrics – Diagnosis Nordmende integrated dishwasher won't turn on – diagnosis Nordmende DF63 dishwasher won't drain: causes and fixes Nordmende DF63 Dishwasher Tripping Electrics: Diagnosis
About the data on this page

This page draws on 201 similar repairs from across 29 years of SMC Services records — over 116,000+ appliance repairs in total since 1997. The likely-cause percentages above are computed directly from the engineer reports we filed for this brand and fault, and we update them as new repairs come in.

SMC Services Ltd · Registered in Northern Ireland, Co. NI628091 · Domestic & Commercial Appliance Repairs.